Click image to view full size image
2 in 1 Guardrail Interchangeable Forming Line
Description:
The production flow of equipment
De-coiling — Feeding (take the sheet to the first station) — leveling ---- Punching one --- punching two --- punching three --- punching four --- roll forming -—— hydraulic cut to length --- auto stacker
The structure of equipment
1: de-coiler with coil car
- Single unrolling machine, one side can put material
- Adopt automatic hydraulic system
- Coil weight (Max):10000kg
- Inter diameter: 470mm-520mm
- Maximal out diameter:1800mm
- Oil cylinder dia:120mm working pressure: 20mpa (=20Tons)
- Coil width (Max.):1000mm
- Working speed: 0-25m/min
- Power: 5.5KW
- Hydraulic power: 3kw
- De-coiler should be with Loop control and hold down
- Coil car: 10Tons
- the motor power of coil car: 3Kw
- Pressure: 12Mpa
- Sample photo for reference:
2, feeding, leveling
Main features of the machine:The leveling roller's mechanical property such as rigidity and roughness concentration of the surface are rising very much after hardening and tempering. It includes pinch roll and leveling roll. The pinch roll can adjust along. The leveling roll uses the whole structure. There are two adjusting point at the front and the end. It can form a certain banked angle to improve the leveling quality. The feeding port of the leveling machine has a pair of guide plain-barrelled roll and two pairs of guide vertical roll. The guide vertical roll can moves centered or moves at the same time. It is adjusted by hand wheel, so it is convenient to centered
1: feeding the sheet to the guide roller (it is adjustable by right and left).
2: feeding roller: diameter is 160mm, material is 40CR steel, HRC48-52.
