Roofing Panel / Glazed Tile Roll Forming Machine With 12 Roll Station

C/U/Z Purlin Quick Changeable Forming Line

Descrition:

The each part of equipment description:

 1   5 T hydraulic decoiler

Single head decoiler ,hydraulic inner expansion and motorized decoiling

Coil weight (Max):5000kg

Coil dia (Max):1600mmCoil Width(Max.):500mm

Motor power:4kw

2,  2 Rolls Feeding, 5 rolls leveling

Feeding width can be adjustable on the right and left

Feeding roller, dia is  100mm,material 45# steel, high-frequency quenched( heat treatment HRC48-52)

 5 rolls leveling,(2 upper rolls and 3 lower rolls ).diameter 100mm ,quenched material 45# steel, high-frequency quenched( heat treatment HRC48-52)

Hydraulic pre-cut: 1set,hydraulic motor: 5.5kw

4. Roll forming Unit

Main motor power: 37kw motor made in China which connected with the reducer ,model ZSY250

Roll forming stands:20stations

Rolled steel thickness:1.5--4mm

Way of Drive: gearbox with joint coupling drive(see picture below)

Main shaft dia: 90mm ,material: 45steel HB 220-260

Rollers material: GCr15 forged steel, quenched 58°-62

Working speed:5m--12m/min(not including punching)

Machine structure: heavy forged iron stands( see the picture below)

All of the C/U/Z profiles can be produced in this machine

   For C/U purlin: width:80-300mm height:40mm—80mm(adjust automatically  by PLC)

   For Z purlin:width :100-300mm  height:50mm—80mm(adjust automatically by PLC)

It needs 30 min to finish changing from C/U to Z profiles

Roofing Panel / Glazed Tile Roll Forming Machine With 12 Roll Station